OSHA Outreach Training

OSHA Outreach Training has become a staple in the construction world, and we are seeing more and more demand in the manufacturing world.  With training available for production workers through the 10 hour course.  Supervisors will benefit from the additional topics covered and the emphasis on safety leadership in the 30 hour course.

OSHA Outreach Training has some rules associated with it’s scheduling.  The 10 Hour OSHA Outreach Training has to be completed over a minimum of two sessions.  The 30 Hour OSHA Outreach Training has to be completed over a minimum of four sessions.  As a result of this, we are extremely flexible, willing to design a training schedule that will suit your needs.

OSHA Outreach Training Offered:

10 Hour OSHA Outreach Training – Construction
10 Hour OSHA Outreach Training – General Industry
30 Hour OSHA Outreach Training – Construction
30 Hour OSHA Outreach Training – General Industry

We have mobile training vehicles established in 5 strategic locations across the country, and our trainers are willing, and accustomed to traveling.  With OSHA fines being raised by 5 times it is critical to have a safety plan, and safety training that will support that plan.

Safety Training Map

Safety Training Map

Contact us today by dialing 513-372-6232, email sales@pasafety.com, or simply complete the form below.

reached your limit

OSHA Outreach Training Course Descriptions:

10 Hour OSHA Outreach Construction Training

10 Hour OSHA Outreach Construction Training has become the industry standard for all construction site line employees. Our 10 Hour OSHA Outreach Construction Training has been designed to reduce workplace accidents.  Our goal is to give your employees the tools needed to identify and eliminate potential workplace hazards.  Eliminating hazards is the key ingredient to preventing accidents and injuries.

10 Hour OSHA Outreach Construction Training Program is intended to provide entry level workers broad awareness on recognizing and preventing hazards at your workplace. OSHA recommends this training as an orientation to occupational safety and health. Workers must receive additional training on hazards specific to their job. Instructional time must be a minimum of 10 hours.

Email sales@pasafety.com, or dial toll-free 877-209-9648 to schedule a class today.

Topics Covered:

  • Mandatory Topics – 7 hours
    • Introduction to OSHA – 2 hours
    • OSHA Focus Four Hazards – 4 hours
    • Personal Protective and Lifesaving Equipment – 30 minutes.
    • Health Hazards in Construction – 30 minutes. (May teach noise, GHS hazard communication, and crystalline silica or any other construction health hazard.)
  • Elective Topics – 2 hours
    • At least two topics must be presented. The minimum length of any topic is one-half hour.
    • Cranes, Derricks, Hoists, Elevators, & Conveyors
    • Excavations
    • Materials Handling, Storage, Use and Disposal
    • Scaffolds
    • Stairways and Ladders
    • Tools – Hand and Power
  • Optional Topics – 1 hour
    • Asbestos
    • Confined Spaces
    • Cystalline Silica
    • Lead
    • GHS Hazard Communication

Email sales@pasafety.com, or dial toll-free 877-209-9648 to schedule a class today.

10 Hour OSHA Outreach Construction Training

10 Hour OSHA Outreach Construction Training Picture

Related Articles:

How Do You Benefit From OSHA Training
OSHA’s Benefit and Resources Page
Training Requirements in OSHA Standards and Training

10 Hour OSHA Outreach General Industry Training

The 10-hour OSHA Outreach General Industry Training Program is intended to provide entry level general industry workers broad awareness on recognizing and preventing hazards on a general industry site. The training covers a variety of safety and health hazards which a worker may encounter at a general industry site. OSHA recommends this training as an orientation to occupational safety and health. Workers must receive additional training on hazards specific to their job. Training should emphasize hazard identification, avoidance, control and prevention, not OSHA standards. Instructional time must be a minimum of 10 hours.

Training Topics:

  • Mandatory Topics:
    • Introduction to OSHA
    • Walking and Working Surfaces, Subpart D – including fall protection
    • Exit Routes, Emergency Action Plans, Fire Prevention Plans, and Fire Protection, Subpart E & L
    • Electrical, Subpart S
    • Personal Protective Equipment, Subpart I
    • Hazard Communication, Subpart Z
  • Elective Topics:
    • Hazardous Materials, Subpart H
    • Materials Handling, Subpart N
    • Machine Guarding, Subpart O
    • Introduction to Industrial Hygiene, Subpart Z
    • Bloodborne Pathogens, Subpart Z
    • Ergonomics
    • Safety and Health Program
  • Optional:
    • For the remaining two class hours choose any of the elective classes or site specific general industry topics to fill the time.

proActive Safety Services will work with your company to design a 10-hour OSHA Outreach General Industry class that applies to your business processes. Our goal with every ten hour class is to increase the awareness of potential hazards in your workplace so your employees can avoid workplace accidents and injuries.

For more information or to schedule a training please email sales@pasafety.com or dial toll-free 877-209-9648.

OSHA Ourteach General Industry Training

OSHA Training at your location or ours.

Related Articles:

What to do when OSHA arrives.
GHS – Global Harmonized System

30 Hour OSHA Outreach Construction Training

proActive Safety Services 30 Hour OSHA Outreach Construction Training course is one of your best options for employee safety training.  Not only is it one of OSHA’s most recognized initiatives, the 30 hour course will provide your employees with advanced knowledge of a wide range of workplace safety regulations.  By providing the foundation of construction safety training, your employee’s safety and health awareness will be raised to new levels, which in turn will reduce accidents.   OSHA Outreach Construction Training plays an important role in the development of a strong safety culture because it eliminates the “I didn’t know” factor.

proActive Safety Services will provide your employees with the most interactive and in-depth training available. Unlike most 30 hour classes on the market today, our team will work hand in hand with you to choose the elective courses that best meet your company’s needs.  Each student will leave the class possessing knowledge that is specific to your industry along with detailed documentation and links to resources for future reference.  Additionally, your training facilitator will provide contact information for any future questions, concerns, or needs that arise during the practical application of your 30 hr course.

The 30-hour Construction Outreach Training Program is intended to provide a variety of training to workers with some safety responsibility. Training should emphasize hazard identification, avoidance, control, and prevention, not OSHA standards. Instructional time must be a minimum of 30 hours

Training Topics:

  • Mandatory – 15 Hours
    • Introduction to OSHA – 2 Hours
    • Managing Safety and Health – 2 Hours
    • OSHA Focus Four Hazards – 6 Hours
    • Personal Protective and Lifesaving Equipment – 2 Hours
    • Health Hazards in Construction – 2 Hours
    • Stairways and Ladders – 1 Hour
  • Elective – 12 Hours
    • Concrete and Masonry Construction
    • Confined Space Entry
    • Cranes, Derricks, Hoists, Elevators, and Conveyors
    • Ergonomics
    • Excavations
    • Fire Protection and Prevention
    • Materials Handling, Storage, Use and Disposal
    • Motor Vehicles, Mechanized Equipment and Marine Operations
    • Rollover Protective Structures and Overhead Protection
    • Signs, Signals, and Barricades
    • Powered Industrial Vehicles
    • Safety and Health Programs
    • Scaffolds
    • Steel Erection
    • Tools – Hand and Power
    • Welding and Cutting
    • Foundations for Safety Leadership
  • Optional – 3 Hours
    • Other construction industry hazards or policies.
30 Hour OSHA Outreach Construction Training

30 Hour OSHA Outreach Construction Training

30 Hour General Industry OSHA Outreach Training

Our team will work with your company to design a 30 hour class that applies to your business processes. Our goal with every 30 hour class is to increase the awareness of potential hazards in your workplace.
With rapid advancement of production workers to supervisors. Having the flexibility to promote production employees, yet, keep a solid grasp of the safety program is vital.  30 Hour OSHA Outreach General Industry Standard does just that.  Experienced leaders will gain a better understanding of safety processes, hazards, and guidelines.  And new leaders will be able to get a great overview along with the details the experienced leaders gain. Arming your workforce with hazard knowledge is key to preventing them.
The 30-hour General Industry Outreach Training Program is intended to provide a variety of training to workers with some safety responsibility. Training should emphasize hazard identification, avoidance, and control and prevention. Instructional time must be a minimum of 30 hours.

Training Topics:

  • Mandatory – 13 Hours
    • Introduction to OSHA – 2 Hours
    • Managing Safety and Health – 2 hours
    • Walking and Working Surfaces, including fall protection – 1 hour
    • Exit Routes, Emergency Action Plans, Fire Prevention Plans, and Fire Protection – 2 hours
    • Electrical – 2 hours
    • Personal Protective Equipment (PPE) – 1 hour
    • Materials Handling – 2 hours
    • Hazard Communication – 1 hour
  • Elective – 10 hours
    • Hazardous Materials
    • Permit-Required Confined Spaces
    • Lockout / Tagout
    • Machine Guarding
    • Welding, Cutting, and Brazing
    • Introduction to Industrial Hygiene
    • Bloodborne Pathogens
    • Ergonomics
    • Fall Protection
    • Safety and Health Programs
    • Powered Industrial Vehicles
  • Optional – 7 hours
    • Other general industry hazards or policies
30 Hour OSHA Outreach General Industry Training

30 Hour OSHA Outreach General Industry Training

Related Articles:

Utility Knife Safety
Truck Safety
Welding Safety

There was a problem with your submission. Please review the fields below.

    Bring In House

    There was a problem with your submission. Please review the fields below.

      10 Hour Construction

      10 Hour OSHA Outreach Construction Training

      10 Hour OSHA Outreach Construction Training has become the industry standard for all construction site line employees. Our 10 Hour OSHA Outreach Construction Training has been designed to reduce workplace accidents.  Our goal is to give your employees the tools needed to identify and eliminate potential workplace hazards.  Eliminating hazards is the key ingredient to preventing accidents and injuries.

      10 Hour OSHA Outreach Construction Training Program is intended to provide entry level workers broad awareness on recognizing and preventing hazards at your workplace. OSHA recommends this training as an orientation to occupational safety and health. Workers must receive additional training on hazards specific to their job. Instructional time must be a minimum of 10 hours.

      Email sales@pasafety.com, or dial toll-free 877-209-9648 to schedule a class today.

      Topics Covered:

      • Mandatory Topics – 7 hours
        • Introduction to OSHA – 2 hours
        • OSHA Focus Four Hazards – 4 hours
        • Personal Protective and Lifesaving Equipment – 30 minutes.
        • Health Hazards in Construction – 30 minutes. (May teach noise, GHS hazard communication, and crystalline silica or any other construction health hazard.)
      • Elective Topics – 2 hours
        • At least two topics must be presented. The minimum length of any topic is one-half hour.
        • Cranes, Derricks, Hoists, Elevators, & Conveyors
        • Excavations
        • Materials Handling, Storage, Use and Disposal
        • Scaffolds
        • Stairways and Ladders
        • Tools – Hand and Power
      • Optional Topics – 1 hour
        • Asbestos
        • Confined Spaces
        • Cystalline Silica
        • Lead
        • GHS Hazard Communication

      Email sales@pasafety.com, or dial toll-free 877-209-9648 to schedule a class today.

      10 Hour OSHA Outreach Construction Training

      10 Hour OSHA Outreach Construction Training Picture

      Related Articles:

      How Do You Benefit From OSHA Training
      OSHA’s Benefit and Resources Page
      Training Requirements in OSHA Standards and Training

      10 Hour General Industry

      10 Hour OSHA Outreach General Industry Training

      The 10-hour OSHA Outreach General Industry Training Program is intended to provide entry level general industry workers broad awareness on recognizing and preventing hazards on a general industry site. The training covers a variety of safety and health hazards which a worker may encounter at a general industry site. OSHA recommends this training as an orientation to occupational safety and health. Workers must receive additional training on hazards specific to their job. Training should emphasize hazard identification, avoidance, control and prevention, not OSHA standards. Instructional time must be a minimum of 10 hours.

      Training Topics:

      • Mandatory Topics:
        • Introduction to OSHA
        • Walking and Working Surfaces, Subpart D – including fall protection
        • Exit Routes, Emergency Action Plans, Fire Prevention Plans, and Fire Protection, Subpart E & L
        • Electrical, Subpart S
        • Personal Protective Equipment, Subpart I
        • Hazard Communication, Subpart Z
      • Elective Topics:
        • Hazardous Materials, Subpart H
        • Materials Handling, Subpart N
        • Machine Guarding, Subpart O
        • Introduction to Industrial Hygiene, Subpart Z
        • Bloodborne Pathogens, Subpart Z
        • Ergonomics
        • Safety and Health Program
      • Optional:
        • For the remaining two class hours choose any of the elective classes or site specific general industry topics to fill the time.

      proActive Safety Services will work with your company to design a 10-hour OSHA Outreach General Industry class that applies to your business processes. Our goal with every ten hour class is to increase the awareness of potential hazards in your workplace so your employees can avoid workplace accidents and injuries.

      For more information or to schedule a training please email sales@pasafety.com or dial toll-free 877-209-9648.

      OSHA Ourteach General Industry Training

      OSHA Training at your location or ours.

      Related Articles:

      What to do when OSHA arrives.
      GHS – Global Harmonized System

      There was a problem with your submission. Please review the fields below.

        30 Hour Construction

        30 Hour OSHA Outreach Construction Training

        proActive Safety Services 30 Hour OSHA Outreach Construction Training course is one of your best options for employee safety training.  Not only is it one of OSHA’s most recognized initiatives, the 30 hour course will provide your employees with advanced knowledge of a wide range of workplace safety regulations.  By providing the foundation of construction safety training, your employee’s safety and health awareness will be raised to new levels, which in turn will reduce accidents.   OSHA Outreach Construction Training plays an important role in the development of a strong safety culture because it eliminates the “I didn’t know” factor.

        proActive Safety Services will provide your employees with the most interactive and in-depth training available. Unlike most 30 hour classes on the market today, our team will work hand in hand with you to choose the elective courses that best meet your company’s needs.  Each student will leave the class possessing knowledge that is specific to your industry along with detailed documentation and links to resources for future reference.  Additionally, your training facilitator will provide contact information for any future questions, concerns, or needs that arise during the practical application of your 30 hr course.

        The 30-hour Construction Outreach Training Program is intended to provide a variety of training to workers with some safety responsibility. Training should emphasize hazard identification, avoidance, control, and prevention, not OSHA standards. Instructional time must be a minimum of 30 hours

        Training Topics:

        • Mandatory – 15 Hours
          • Introduction to OSHA – 2 Hours
          • Managing Safety and Health – 2 Hours
          • OSHA Focus Four Hazards – 6 Hours
          • Personal Protective and Lifesaving Equipment – 2 Hours
          • Health Hazards in Construction – 2 Hours
          • Stairways and Ladders – 1 Hour
        • Elective – 12 Hours
          • Concrete and Masonry Construction
          • Confined Space Entry
          • Cranes, Derricks, Hoists, Elevators, and Conveyors
          • Ergonomics
          • Excavations
          • Fire Protection and Prevention
          • Materials Handling, Storage, Use and Disposal
          • Motor Vehicles, Mechanized Equipment and Marine Operations
          • Rollover Protective Structures and Overhead Protection
          • Signs, Signals, and Barricades
          • Powered Industrial Vehicles
          • Safety and Health Programs
          • Scaffolds
          • Steel Erection
          • Tools – Hand and Power
          • Welding and Cutting
          • Foundations for Safety Leadership
        • Optional – 3 Hours
          • Other construction industry hazards or policies.

        30 Hour OSHA Outreach Construction Training

        30 Hour OSHA Outreach Construction Training

        Related Articles:

        OSHA fines are going up
        How do you benefit from OSHA Training?

        There was a problem with your submission. Please review the fields below.

          30 Hour General Indsutry

          30 Hour General Industry OSHA Outreach Training

          Our team will work with your company to design a 30 hour class that applies to your business processes. Our goal with every 30 hour class is to increase the awareness of potential hazards in your workplace.

          With rapid advancement of production workers to supervisors. Having the flexibility to promote production employees, yet, keep a solid grasp of the safety program is vital.  30 Hour OSHA Outreach General Industry Standard does just that.  Experienced leaders will gain a better understanding of safety processes, hazards, and guidelines.  And new leaders will be able to get a great overview along with the details the experienced leaders gain. Arming your workforce with hazard knowledge is key to preventing them.

          The 30-hour General Industry Outreach Training Program is intended to provide a variety of training to workers with some safety responsibility. Training should emphasize hazard identification, avoidance, and control and prevention. Instructional time must be a minimum of 30 hours.

          Training Topics:

          • Mandatory – 13 Hours
            • Introduction to OSHA – 2 Hours
            • Managing Safety and Health – 2 hours
            • Walking and Working Surfaces, including fall protection – 1 hour
            • Exit Routes, Emergency Action Plans, Fire Prevention Plans, and Fire Protection – 2 hours
            • Electrical – 2 hours
            • Personal Protective Equipment (PPE) – 1 hour
            • Materials Handling – 2 hours
            • Hazard Communication – 1 hour
          • Elective – 10 hours
            • Hazardous Materials
            • Permit-Required Confined Spaces
            • Lockout / Tagout
            • Machine Guarding
            • Welding, Cutting, and Brazing
            • Introduction to Industrial Hygiene
            • Bloodborne Pathogens
            • Ergonomics
            • Fall Protection
            • Safety and Health Programs
            • Powered Industrial Vehicles
          • Optional – 7 hours
            • Other general industry hazards or policies
          30 Hour OSHA Outreach General Industry Training

          30 Hour OSHA Outreach General Industry Training

          Related Articles:

          Utility Knife Safety
          Truck Safety
          Welding Safety

          There was a problem with your submission. Please review the fields below.

            John was simply an awesome instructor. It was obvious he was knowledgeable and qualified to instruct the class. Very open and approachable with any and all questions I had. I’d recommend anyone for his classes. Thanks for providing the ProActive easy to follow class.

            Brian T.Owner

            Very informative. Great Instructor!

            John D.Operations Manager

            Great class, very informative. Instructor knew the material, was helpful, worked at a great pace, and engaged the class.

            Jessica K.Supervisor

            Jamie was a great, knowledgeable instructor. He made the class engaging and hands-on so we had a clear understanding of what to do in real world situations.

            Brent H.5 Stars