Date/Time Event
10/01/2019
8:00 am - 4:00 pm
Baltimore EPA RRP Initial Certification – Lead Renovator Training - Baltimore, MD

Baltimore Training Location, Baltimore Maryland
10/01/2019
8:00 am - 4:00 pm
Canton EPA RRP Initial Certification – Lead Renovator Training - Canton, OH

Canton Training Location, Canton Ohio
10/01/2019
8:00 am - 4:00 pm
Charlotte EPA RRP Initial Certification – Lead Renovator Training - Charlotte, NC

Charlotte Training Location, Charlotte North Carolina
10/01/2019
8:00 am - 4:00 pm
Cincinnati EPA RRP Initial Certification – Lead Renovator Training - Cincinnati, OH

Cincinnati Training Location, Cincinnati Ohio
10/01/2019
8:00 am - 4:00 pm
Columbus EPA RRP Initial Certification – Lead Renovator Training - Columbus, OH

Columbus Training Location, Columbus Ohio
10/01/2019
8:00 am - 4:00 pm
Dearborn EPA RRP Initial Certification – Lead Renovator Training - Dearborn, MI

Dearborn Training Location, Dearborn Michigan
10/01/2019
8:00 am - 4:00 pm
Denver EPA RRP Initial Certification – Lead Renovator Training - Denver, CO

Denver Training Location, Denver Colorado
10/01/2019
8:00 am - 4:00 pm
Fort Wayne EPA RRP Initial Certification – Lead Renovator Training - Fort Wayne, IN

Fort Wayne Training Location, Fort Wayne Indiana
10/01/2019
8:00 am - 4:00 pm
Fresno, CA EPA RRP Initial Certification – Lead Renovator Training - Confirmed Class

Fresno Training Location, Fresno California
10/01/2019
8:00 am - 4:00 pm
Gulfport EPA RRP Initial Certification – Lead Renovator Training - Gulfport, MS

Gulfport Training Location, Gulfport Mississippi
10/01/2019 - 10/02/2019
8:00 am - 4:00 pm
Irving EPA RRP Initial Certification - Lead Renovator Training - Irving, TX

Irving Training Location, Irving Texas
10/01/2019
8:00 am - 4:00 pm
Linthicum EPA RRP Lead Renovator Initial Certification Training

Linthicum Training Location, Linthicum Maryland
10/01/2019
8:00 am - 4:00 pm
Marina EPA RRP Initial Certification – Lead Renovator Training - Marina, CA

Marina Training Location, Marina California
10/01/2019
8:00 am - 4:00 pm
Maumee EPA RRP Initial Certification – Lead Renovator Training - Maumee, OH

Maumee Training Location, Maumee Ohio
10/01/2019
8:00 am - 4:00 pm
Omaha EPA RRP Initial Certification – Lead Renovator Training - Omaha, NE

Omaha Training Location, Omaha Nebraska
10/01/2019
8:00 am - 4:00 pm
Palmdale EPA RRP Initial Certification – Lead Renovator Training - Palmdale, CA

Palmdale Training Location, Palmdale California
10/01/2019
8:00 am - 4:00 pm
Pottstown EPA RRP Initial Certification – Lead Renovator Training - Pottstown, PA

Pottstown Training Location, Pottstown Pennsylvania
10/01/2019
8:00 am - 4:00 pm
Punta Gorda - EPA RRP Initial Certification - Lead Renovator Training - Punta Gorda, FL

Punta Gorda Training Location, Punta Gorda Florida
10/01/2019
8:00 am - 4:00 pm
Saint Charles EPA RRP Initial Certification – Lead Renovator Training - Confirmed Class

St. Charles Training Location, St. Charles Illinois
10/01/2019
8:00 am - 4:00 pm
Saint Louis Westport EPA RRP Initial Certification – Lead Renovator Training - Saint Louis Westport, MO

Saint Louis Training Location, Saint Louis Missouri
10/01/2019
8:00 am - 4:00 pm
West Covina EPA RRP Initial Certification – Lead Renovator Training - West Covina, CA

West Covina Training Location, West Covina California
10/01/2019
9:00 am - 4:00 pm
Philadelphia EPA RRP Initial Certification – Lead Renovator Training - Philadelphia, PA

Philadelphia Training Location, Philadelphia Pennsylvania
10/01/2019
5:00 pm - 9:00 pm
Canton Lead Renovator Refresher Training

Canton Training Location, Canton Ohio
10/01/2019 - 10/02/2019
5:00 pm - 9:00 pm
Irving Lead Renovator Refresher Training

Irving Training Location, Irving Texas
10/01/2019
5:00 pm - 9:00 pm
Maumee Lead Renovator Refresher Training

Maumee Training Location, Maumee Ohio
10/01/2019
5:00 pm - 9:00 pm
Omaha Lead Renovator Refresher Training

Omaha Training Location, Omaha Nebraska
10/01/2019
5:00 pm - 9:00 pm
Punta Gorda Lead Renovator Refresher Training

Punta Gorda Training Location, Punta Gorda Florida
10/01/2019
5:00 pm - 9:00 pm
Saint Charles Lead Renovator Refresher Training

St. Charles Training Location, St. Charles Illinois

Calendar

Safety Training Calendar.  Safety Services Where You Need Them!

With 5 safety trainers working full-time on staff, we have the flexibility to react to your training need, when you need it!

Most of our training courses are not listed as open enrollment style courses. The reason is we have found over the years they are very hard to fill, and we would rather not have to cancel the course.

You can view all of the safety training courses we offer by clicking here!

Email sales@pasafety.com or dial 877-209-9648 to register for training. You may also click the link of the course you would like and register online.

EPA Lead Renovator Initial Certification Training Courses

EPA Lead Renovator Training Initial Certification Overview:

Because of the EPA RRP rule, we offer EPA Lead Renovator Training Initial Certification every week!  Did you know that the EPA is requiring Lead Renovator Training? As a result, Lead Renovator Training is required if your company is working in homes built prior to 1978. Therefore, your company must have one certified lead renovator. Because of these requirements, we offer EPA Lead Renovator Training Initial Certification to help keep your firm in compliance.

Description:

Our 8 hour EPA Lead Renovator Training Initial Certification course was developed using the curriculum that is provided jointly by: United States Environmental Protection Agency (EPA) and the United States Department of Housing and Urban Development (HUD).

For the first portion of the course we cover the 8 modules required by the joint curriculum:

  1. Why Should I Be Concerned About Lead Paint?
  2. Regulations
  3. Before Beginning Work
  4. Contain Dust During Work
  5. During the Work
  6. Cleaning Activities and Checking Your Work
  7. Record Keeping
  8. Training Non-Certified Renovation Workers

After completing the classroom portion we then move on to the interactive hands on portion of the training. You will master all 11 skills required:

  1. Using EPA Recognized Test Kits and Paint Chip Sample Collection Procedures
  2. Setting up Barriers, Signs, and Flapped Entry Doors
  3. Cover or Remove Furniture
  4. Establish Interior Containment
  5. Establish Exterior Containment
  6. Personal Protective Equipment
  7. Interior Final Cleaning
  8. Exterior Final Cleaning
  9. Bagging Waste
  10. Visual Inspection
  11. Cleaning Verification Procedure

After mastering each skill set we will have a short review, then a test.

Why do you need this training?

As a result of the EPA RRP rule. If your company is performing work in homes and child-occupied facilities built prior to 1978.  Your firm must employ at least one Certified Renovator. In addition, your firm must be registered as a Lead Safe Certified Firm with the Environmental Protection Agency (EPA).

What is considered qualifying work?

As a result of the rule, beginning in April 2010.  When you are performing renovation, repair and painting projects that disturb lead-based paint in:

  • Homes
  • Child Care Facilities
  • Schools

Therefore, a supervisor must be certified and follow specific work practices to prevent lead contamination!

How do you ensure you are complying?

Because of the EPA RRP rule there are 5 steps to be sure you comply:

  1. First, get registered for an EPA-approved lead renovator training course.
  2. Furthermore, you must apply to EPA to become a certified firm.
  3. Your company must have a representative complete the lead renovator training.
  4. In addition you must pass the 25-question certification exam.
  5. Finally, receive your approval from the EPA.

Who should attend from your company?

  • Owner
  • President
  • Operations Manager
  • Production Supervisors
  • Production Workers

Therefore, if you own a qualifying business, you need to attend this course! As a result of the rule, fines can be as high as $37,500 per violation! Consequently, understanding this rule shouldn’t be delegated.  Most importantly, we go beyond the basics and will give you several tools to stay in compliance as well as protect your increased liability.

How Did We Come Up with Our Schedule?

We have been testing how to increase enrollment and be able to confirm classes now for the last 3 years.  Based on our success and resource availability, we update our Safety Training Calendar annually.

How Do We Decide to Confirm a Course?

We try not to cancel a course more than one time.  However, we have to at least cover our cost to teach the training course. Based off of past sales and location we will confirm a course generally when we reach 5 registrants. We offer worry-free registration and will refund your money if you are unable to attend or need to find a date that is sooner than our next class.

What Courses Does My Company Need?

That really depends on your industry and what type of work you do within that industry. We always recommend conducting a job safety analysis by job type. Once you have finished those, you will then have most of the training that is needed to keep your workers safe.  Based off experience we are generally able to give you a list of training that you will be required to conduct by frequency. Remember, you don’t have to have all your training completed to work safe! Simply download our free JSA form, have your supervisor fill it out each day and review it with everyone working prior to work commencing.  This will at least give everyone knowledge of the hazards they face prior to facing them.

It is important to take care of your highest risk training topics first, and then move into the required topics.

Is OSHA Outreach Training All We Need?

Unfortunately, typically not.  Although, we can tailor OSHA training to your industry and get a lot of your required topics covered within it.  You should always have a strong safety orientation program as it is your opportunity to set the tone for safety.  As a result, typically most companies have specific machinery, tools, and equipment that they will need training for.  Also, most companies need to ensure there is an emergency action plan in place.

A good rule of thumb for OSHA training is to have all of your non-supervisors complete the OSHA 10 Hour training prior to working. Supervisors should complete the OSHA 30 Hour Construction prior to working.

Do You Have a Training Guarantee?

Yes, we guarantee to provide a professional, experienced trainer, who will deliver a interactive training experience. If you are unsatisfied for any reason, we will refund your money and credit your account the price of the course.

What Is Your Cancellation Policy?

If you cancel 7 days prior to the training date, we will refund your money.  If you cancel or no-show to the training, you will be charged a re-booking fee of $100 or lose your money.  Cancellations due to family emergencies, and natural disasters will be rescheduled.

Related Articles

Getting Employees Involved In Safety Training
New Hire Safety Training
What to do when OSHA Arrives